Quality Lilburn GA septic system installers do a number of legwork, long before a unit gets put into the ground. A brand new unit will last years, and possibly even generations, if it’s placed the right way, but it can fail right away if it’s not. On top of that, all Lilburn GA septic system installers must secure a permit for them to perform the install, and may have to work with city or county officials to show that particular tests were performed in order to progress. These three tests are important primary steps that should always be taken before any job or designs are done, and it may also be advantageous to perform them before you acquire a property, so you can be assured that a tank and leach field will be permitted.
1. Pit
The pit test is very uncomplicated. In the course of this test, a hole is excavated and the soil is examined to establish its composition. A typical leach field is reliant on the soil’s composition to drain successfully. If there is a lot of gravel or sand, your leach field should be able to discharge the effluent (water) from the tank well, where the soil will finish sanitizing it. If the soil has a lot of clay or rock, it won’t drain well, consequently a traditional leach field will not be an option. If the location you’ve picked does not pass the pit test, you may be able to choose another site on your property or use an alternate type of drain field, like a mound system.
2. Perc
The perc, or percolation test, consists of excavating a 14-inch deep hole, adding a 2-inch layer of sand or gravel, and then saturating it with water. The hole is commonly left drenched for about two hours, and topped off as needed. After this, the hole is filled with 6 inches of water and observed for drainage.
3. Visual
There are many things an inspector will look into visually. The majority of units are gravity-fed, so they don’t depend on electricity or pumps to transfer effluent from the tank to the leach field. Because of this, the slope of the ground is crucial. An inspector will also search for slopes that could possibly feed excess water into the leach field, as well as nearby bodies of water, the water table, and distance from the proposed unit to things like the home and wells.
Hire Quality Lilburn GA Septic System Installers Today
Selecting the right design, type of system, and assessing the land properly, are all integral procedures in making sure an install goes off without a hitch. Most importantly, these steps guarantee that the install is done properly, so that a system provides many years of use without issue. If you’re preparing for an install, contact Septic Tank Pros Covington GA. Our partner professionals are knowledgeable and dedicated to quality, so you can be sure the job is done right. Call (678) 212-5257 today.